【广电】【固件升级】AG-UX180与AG-UX170 Ver. 1.02固件升级


发布日期:  2017-02-17  作者:  

松下官网刚刚放出最新的AG-UX180 /UX170的固件升级包—Ver. 1.02

Ver. 1.02升级内容:

如果在记录格式为4K的情况下执行ABB(黑平衡),则在屏幕的左端可能会出现几条垂直线,被修复。

NR控制的“+7”设置的黑色电平被校正。

当GAMMA模式设置为CINE_LIKE_V或FILM_LIKE_2时,在高亮度部分的轮廓上出现着色,被修复。

 Download

Name

AG-UX180 /UX170 series Software  (Firmware) Update Data

Last Update

Dec. 26, 2016

Model

AG-UX180 /UX170 series
 AG-UX180P AG-UX180PJ AG-UX180PX AG-UX180EJ AG-UX180EN AG-UX180ED AG-UX180AN  AG-UX180MC AG-UX170ED AG-UX170MC

Registered
 Name/Size

DV91000003D / 64.1 MByte 
 Expected Time for Update Approx. 3min

Copyright

Copyright © Panasonic  Corporation

Transfer

All Rights Reserved

Software

This software is update data  for the applicable model above.

Content

Ver. 1.02-

1.   If ABB is executed  while the recording format is 4K, a few vertical lines may appear at the  left end of the screen. This is fixed.

2.   The black level at   "+7" setting of NR Control is corrected.

3.   When GAMMA mode is set  to CINE_LIKE_V or FILM_LIKE_2, coloring occurs on the contours of a   high-brightness part. This is fixed.

Preparation
 for Upgrade

Copy the update file of the  Software (Firmware) to an SD memory card.
 Software can be updated using this SD memory card.
 Please refer to the procedure in the site.(Printing out of the procedure is  recommended.)

附:

松下专业摄像机完整更新固件方法:

1.确保电池电量满格,最好使用适配器;

2.机内格式化SD卡,切记,一定要机内格式化,关机,然后取出卡,将卡连接到电脑;

3.下载固件升级压缩包,将压缩包解压,将解压后的文件(UPDATE.HDC)放到已格式化的SD卡的根目录下,将卡插入机器;

4.开机,打开菜单页面,点击“维护”-“固件升级”,20秒后机器自动重启;

5.再次打开菜单页面,点击“维护”-“固件升级”-“其他功能”-“初始化设置”-“全部”选择“是”,关机,重新启动,完成。